Never worry about how much to dribble again! This 16 oz. plastic dispensing bottle features a 1 oz. (30mL) dispensing chamber with a 5mL mark to make measurements easy.
How to use the EZ-Dribbler to dribble fluid into your hives:
Prepare your liquid in another container, then pour it into the main reservoir of the EZ-Dribbler by removing theFLATcap. Replace the cap tightly when you have filled the main reservoir.
Hold the EZ-Dribbler upright and squeeze the main reservoir slowly to force liquid up the feed line and into the small measuring chamber. One side of the chamber is labeled in milliliters, and the other is labeled in fluid ounces. Squeeze until you have filled the measurement chamber with the desired fluid amount (e.g. 5 mL).
Twist theDISPENSINGcap to open it, then tip the EZ-Dribbler bottle over the open hive with the measuring chamber and spout positioned above theFLATcap. The point of this positioning is to prevent new fluid from entering the feed line that runs up the side of the bottle. The feed line connects the main reservoir to the measuring chamber, so when you squeeze the main chamber to dispense your measured fluid amount, the feed line must be forcingAIRfrom the main chamber into the measuring chamber, notMORE FLUID.
Squeeze the main reservoir to dispense the fluid onto the bees, then turn the bottle upright to measure out the next dose into the measurement chamber.
Follow the manufacturer's safety, health, and application instructions for any products you may dispense with your EZ-Dribbler.